Wholesale Guide

Mod Transport Vibration and Pack Protection — Plain Language

Published 2026-03-19 · 6 min read · by the VapeWholesaleHub sourcing team

There is a version of mod that sells through in six weeks and a version that sits in a back room for a year. The difference is rarely obvious from a product photo. Below is the checklist our team uses when a distributor asks us to quote mod for the first time.

Mod product overview — Reference view of the mod line prepared for wholesale evaluation.

Freight, Customs and Timing

Split mod shipments across two sailings when the order is large enough. It costs slightly more but removes the risk of a single event wiping out a full quarter of stock.

Mod logistics and packing — Master carton configuration used for mod shipments.

Quality Control in Practice

Set the mod complaint threshold in the contract before you need it. Deciding what counts as an acceptable defect rate during a dispute is the worst possible time to negotiate it.

The defect rate that matters is the one your customer experiences, not the one the factory reports. Bridge that gap by inspecting the way a customer would open the box, not the way a line worker packs it.

Confirm the current customs classification with your own broker.
Model landed cost, not ex-works price, when comparing quotes.
Plan the switch from air to sea freight before you need it.
Agree the tolerance band in writing before approving artwork.
Rotate stock by batch code rather than by delivery date.

Turning Mod Into Repeats

Staff knowledge moves mod more than any fixture. A two minute explanation of the difference between this line and the one next to it converts a browsing shopper into a repeat buyer far more reliably than a discount.

A mod display that answers strength and flavour without staff involvement outsells a prettier one that does not. Most customers will not ask, so the fixture has to do the work.

Reading a Mod Spec Sheet

Specification sheets are where a mod deal is won or quietly lost. Two samples can look and taste the same while using different coil wire, different wicking density and different tolerances on the mouthpiece. Those details decide how the unit behaves in week three rather than minute three.

Reference specification for Mod orders
Product category	Pod system
Resistance band	0.6 - 0.8 ohm
Capacity tolerance	+/- 3%
Puff count method	Machine cycle 2s on / 18s off
Master carton	100 units
Carton weight	5.3 kg
Shelf life	18 months
Storage	15-25 C, dry, away from direct light

Where Mod Sits in the Range

Before anything else, decide which customer you are buying mod for. A convenience counter with limited shelf depth needs a tight range that turns quickly, while a specialist shop can carry a deeper ladder of options and educate buyers into higher ticket lines.

Think about where mod sits in your customer's week. If it is a weekly restock, breadth matters less than availability. If it is an occasional treat, flavour range and display story carry more weight.

What Mod Really Costs Landed

When you model mod pricing, build in a realistic shrink figure. Even a well run line loses a small percentage to damage, expiry and sampling. Pretending that number is zero is how a healthy looking margin turns negative.

Indicative reference points for planning purposes: entry tier from USD 2.31 per unit at 500 units, mid tier at USD 1.57, and volume tier at USD 1.42 for full container quantities. These figures move with specification, packaging and freight, so treat them as a shape rather than a quote.

Practical Checklist

Keep sealed retained samples from every production batch.
Write the complaint threshold into the order terms.
Start with a mixed carton and let your own sell-through decide.
Confirm the current customs classification with your own broker.
Model landed cost, not ex-works price, when comparing quotes.
Check carton dimensions against your freight quote before confirming.

Frequently Asked Questions

Can you match an existing product I already sell?

Often yes, provided we can measure it properly. Send a physical sample and we will report back on what can be matched, what will differ slightly, and why. An honest gap is more useful than a vague promise.

Do you provide compliance documents?

Every shipment leaves with the documentation set relevant to your market, including batch records and test reports where required. Your local rules still determine what you must file, so confirm those with your broker before import.

What if a batch does not match the sample?

Keep the retained samples from the approval stage. If a delivered batch measurably differs, we compare against the retained set and resolve it against the production record. This is why we insist on sealed retained units from every run.

What information do you need to quote?

Target specification, approximate quantity, destination and any packaging requirement. With those four we can usually come back with a costed option the same working day rather than a request for more information.

Next Step

Questions that are not answered here are usually the interesting ones. Reach out with the specifics of your market and we will answer with numbers rather than adjectives.

Phone+86 13711127975

WeChat+86 13711127975

WhatsApp+86 13711127975